top of page
NABAKEM ZINCOT N-50

NABAKEM ZINCOT N-50

ZINCOT N-50
Cold Galvanizing Coating
Packaging Unit
Aerosol 420ml/can, 20EA/Box

  • Features

    • Excellent heat resistance: up to 250℃.

    • Provides long-term rust prevention.

    • Can be welded even after coating.

    • Salt spray test: 5% salt solution, 360 hours.

    • Impact test: 500g weight dropped from 50cm (coating thickness 20μm).

    • Bending test: No change in coating when bent 180 degrees at 2mm intervals.

    • Coverage area: 2–3㎡ per can.

  • Uses

    • Used for repair and replacement coating of galvanized and Metalicone surfaces.
    • For repairing damaged galvanized areas.
    • For rust prevention of steel materials and structures.
    • Provides a finish similar to zinc plating.
    • Serves as a welding primer for various steel materials.

  • How To Use

    • Before application, thoroughly remove oil, grease, rust, dust, and other contaminants from the surface.

    • Shake well before use, and continue to shake frequently during use.

    • For best results, apply several thin coats rather than a single thick coat.

    • For long-term storage, after use, hold the container upside down and spray until no more liquid comes out.

  • Cautions

    • Always shake well before use.

    • If painting for an extended period, shake occasionally to prevent settling of active ingredients and maintain uniformity.

    • Do not use directly in acidic or alkaline environments, or on surfaces wet with acid.

    (In such cases, use a chemical-resistant topcoat.)

    • Avoid prolonged use in areas continuously immersed in hot water (above 40℃).

    • If the aerosol can will not be used for a long time after partial use, store it upside down and spray until no more liquid comes out to prevent nozzle clogging.

    • As this is a flammable product containing high-pressure gas, strictly observe the following precautions:

       - Do not use toward open flames.

       - Do not use near stoves, heaters, or other sources of ignition.

       - Do not use indoors where open flames are present.

       - Do not store in places where the temperature exceeds 40℃.

       - After use in enclosed spaces, ensure proper ventilation.

       - Do not dispose of the product in fire.

       - After use, puncture the empty can to completely release any remaining gas before disposal.

       - Do not store in confined spaces.

       - Spraying performance may be poor at temperatures below 5℃.

bottom of page